How To Secure Flush Door Pulls

Improve Flush Door Pulls

The flush door pulls glass are a common feature of many homes. They often lead to an outside terrace. These let in lots of natural light and provide a wider view of the exterior compared to conventional doors. The negative factor of sliding doors is that they are easy to break into. Their locks can be forced easily. Even if you have installed the best lock available, due to its construction, they will not provide much more security. The bands are constructed of wood, aluminum or vinyl. And they simply stick to a wooden or metal frame.

What you can do to secure them is to install a metal bar so that the door can not be opened by flush door pulls it. Read and follow the manufacturer’s instructions in the metal safety bar package. Basically, you will mount the base of the bar in the frame of the fixed door. There will be a bar attached to the base that moves up and down. Measure from the bottom of the glass sliding door frame fixed as many inches as recommended by the manufacturer. Mark the point with a pencil.

Read More  Practical Rustic Barn Door Pulls

Position the base of the safety flush door pulls bar at the point you marked to determine where the screw holes should be drilled. Make sure that the base is positioned so that the movable bar is raised. Mark the places where you need to drill with a pencil. Leave the base to one side. Drill the holes for the screws in the frame. Place the base on the frame again. Align the holes for the mounting screws with the holes you drilled.